* Hot melt leading edge closure
* Improve leading edge rienforcement
* Transitional strut reinforcements
* Flat seam panel Construction
* 70 GSM trailing edge material
* Toughened canopy material
* Full contact strut connection
* Reinforced sturt tips
* Two-ply trailing edge
* Improved bridle lines
Transitional canopy to leading edge reinforcement
All kites feature flat seams exclusively.
Heat reactive tape bonds the leading edge closing seam prior to sewing.
This season Cabrinha takes durability head-on with the addition of transitional strut panel materials and reinforced LE closing seams. Cabrinha has reinforced the high load areas of our kites with a transitionally weighted material. This well-placed material acts as a buffer zone between the rigid strut areas and the canopy. The entire canopy of all kites are flat seamed and taped prior to sewing. This is 20% stronger than the free hand sewn method of a top stitch.
The leading edge closing seams now impliments a hot melt glue tape in the leading edge closing seam for added strength. The entire trailing edge implements a two-ply of tough 70 gsm material for added durability and strength.
The full contact between the strut and the leading edge helps to ensure a rigid frame. The positive connection not only provides stability while the kite is in flight but delivers added durability and a rapid relaunch.
Improved bridle lines
Cabrinha use a corded bridle material for use in the sections that pass through the pulley.
Full contact between the strut and the leading edge helps to ensure a rigid frame.
Transitional strut reinforcement
at
high-load areas.
Wingtip Chafe protection.
New durability measures allow the kites to take a pounding
in the surf and live to fly again.
70 gsm material on trailing edge for added durability & strength.
